Panasonic Mounter NPM-TT2 multifunctional production system placement machine

The Panasonic Mounter NPM-TT2 is a line configuration capable of achieving both high productivity per unit area and versatility *When directly connecting the NPM-W2, an M-size double-track conveyor belt (optional) is required. The placement head (8-nozzle placement head, 3-nozzle placement head – you can choose the general-purpose 8-nozzle placement head or the 3-nozzle placement head with special-shaped component capability) The specification of the supply part can be selected .change. By reorganizing the tray feeder/exchange trolley, the line configuration can be adapted to the component supply form. Using a multi-functional recognition camera, the recognition and inspection of the height direction of the components can be realized at a high speed, and it can carry out stable and high-speed mounting of special-shaped components) Alternate mounting and independent mounting correspondence
——(can choose the best mounting method corresponding to the production substrate)

Enquiry

Technical Parameters:
C substrate size:
Monorail: L50mm*W50mm～L510mm*W590mm
Double track type: L50mm*W50mm～L510mm*W300mm
M substrate size:
Monorail: L50mm*W50mm～L510mm*W510mm
Double track type: L50mm*W50mm～L510mm*W260mm
Substrate replacement time
Single rail type: 4.0s (when no components are mounted on the reverse side of the substrate)
Dual-track type: 0s*When the cycle time is less than 4.0s, it cannot be 0S.
Power supply: three-phase AC200, 220, 380, 400, 420, 480V 2.5kVA
Air pressure source: Min.0.5MPa, 200L/min(A.N.R.)
Equipment size: W1300mm*D2798mm*H1444mm
Weight: 2690kg (Main body only: Varies depending on the configuration of options.)

Functional characteristics of Panasonic placement machine NPM-TT machine:
1. Basic specifications
1. The specification of the supply part can be selected (the tray feeder or the exchange trolley can be selected according to the variety and quantity of the component shape)
2. Mounting head (8-nozzle placement head, 3-nozzle placement head) (you can choose a versatile 8-nozzle placement head or a 3-nozzle placement head with special-shaped component capabilities)
3. Alternate mounting and independent mounting (the most appropriate mounting method can be selected according to the production substrate)
4. It can be directly connected to NPM-D (by directly connecting to NPM-D, it can form a production line that realizes high productivity per unit area and versatility at the same time)
5. It can correspond to the APC system (optional) (from microchips to packaged chip components, contributing to high-quality packaging)
2. Productivity
1. High productivity of completely independent mounting (realize independent mounting of tray components. Increase the speed of medium-sized and large-scale component mounting through the 3-nozzle placement head. Improve the overall output of the production line.)
2. Support pin automatic replacement function (option) (The position replacement operation of the support pin is automated, which contributes to the realization of non-stop machine switching, labor saving, and prevention of operating errors.)
3. Versatility
1. Correspondence to large components (can correspond to large components of 150*25mm, and QFP components of 80mm can also be identified through segmentation.)
2. Transfer unit (optional) (a camel-type transfer unit* is installed at the 13 stations fixed on the rear rack, which can be used to print and install PoP components (tapes, trays), etc.)
3. Free configuration of material racks (if they are in the same workbench, material racks can be freely configured. During production, components can be alternately arranged, and material racks for the next model can also be placed in empty material rack slots.)

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Click to enlarge

Back to products

Categories: Panasonic, SMT placement machine

Description
Shipping & Delivery

Description

Shipping & Delivery

Reviews

There are no reviews yet.

Be the first to review “Panasonic Mounter NPM-TT2 multifunctional production system placement machine”

Related products

Yamaha 3D Hybrid Modular S10/S20 Mounter placement machine

SMT placement machine, Yamaha

Specifications

	S10	S20
Board size(with buffer unused)	Min. L50 x W30mm to Max. L1,330 x W510mm (Standard L955)	Min. L50 x W30mm to Max. L1,830 x W510mm (Standard L1,455)
Board size(with input or output buffer used)	Min. L50 x W30mm to Max. L420 x W510mm	-
Board size(with input and output buffers used)	Min. L50 x W30mm to Max. L330 x W510mm	Min. L50 x W30mm to Max. L540 x W510mm
Board thickness	0.4 - 4.8mm	0.4 - 4.8mm
Board flow direction	Left to right (Std)	Left to right (Std)
Board transfer speed	Max 900mm/sec	Max 900mm/sec
Placement speed (12 heads + 2 theta) Opt. Cond.	0.08sec/CHIP (45,000CPH)	0.08sec/CHIP (45,000CPH)
Placement accuracy A (μ+3σ)	CHIP +/-0.040mm	CHIP +/-0.040mm
Placement accuracy B (μ+3σ)	IC +/-0.025mm	IC +/-0.025mm
Placement angle	+/-180 degrees	+/-180 degrees
Z axis control / Theta axis control	AC servo motor	AC servo motor
Component height	Max 30mm^*1 (Pre-placed components: max 25mm)	Max 30mm^*1 (Pre-placed components: max 25mm)
Applicable components	0201mm – 120x90mm, BGA, CSP, connector, etc. (Standard 01005 -)	0201mm – 120x90mm, BGA, CSP, connector, etc. (Standard 01005 -)
Component package	8 - 56mm tape (F1/F2 Feeders), 8 - 88mm tape (F3 Electric Feeders), stick, tray	8 - 56mm tape (F1/F2 Feeders), 8 - 88mm tape (F3 Electric Feeders), stick, tray
Drawback check	Vacuum check and vision check	Vacuum check and vision check
Screen language	English, Chinese, Korean, Japanese	English, Chinese, Korean, Japanese
Board positioning	Board grip unit, front reference, auto conveyor width adjustment	Board grip unit, front reference, auto conveyor width adjustment
Component types	Max 90 types (8mm tape), 45 lanes x 2	Max 180 types (8mm tape), 45 lanes x 4
Transfer height	900 +/- 20mm	900 +/- 20mm
Machine dimensions, weight	L1250xD1750xH1420mm, Approx. 1,200kg	L1750xD1750xH1420mm, Approx. 1,500kg

*1 :: Board thickness + Component height = Max 30mm

Specifications and appearance are subject to change without prior notice.

SMT ASM Siemens Mounter HS60/SIPLACE High Speed Mounter

SMT placement machine, ASM SIEMENS

Number of gantry: 4 Theoretical placement rate: 60000cph Component range: 0.6mmx0.3mm (0201) to 18.7mmx18.7mm Mounting accuracy (4sigma): 80/75um The size of the PCB that can be attached: Single track: 50mmx50mm to 368mmx460mm

Panasonic NPM-D3 placement machine Panasonic high-speed module placement machine

SMT placement machine, Panasonic

1. Panasonic NPM-D3 placement machine, Panasonic placement machine NPM-D3, Panasonic high-speed module placement machine parameters: 1. Model name: NPM-D3 (Panasonic

Samsung Hanwha HM520 mounter placement pick and place machine

SMT placement machine, Samsung Hanwha

Alignment: Fix Camera

Number of Spindles: 20 spindles x 2 Gantry (Rotary Type)

Placement Speed: 80,000 CPH

Placement Accuracy: ±25 μm @ Cpk ≥ 1.0 (Chip)

Component Range: 0201 ~ □ 6 mm

Super High Efficiency Dual Lane Modular YRM20DL Mounter placement machine

Model	YRM20
Model	Super high-speed rotary RM head	High-speed general-purpose in-line HM head	Odd-shaped components in-line FM (flexible-multi) head
Nozzles (per 1 head unit)	18	10	5
Applicable components	0201mm to W12 x L12mm, Height 6.5mm or less	0201mm to W55 x L100mm, Height 15mm or less	03015mm to W55 x L100mm, Height 30mm or less
Mounting capability (under optimum conditions)	120,000CPH ^{Note 1}	100,000CPH ^{Note 1}	35,000CPH
Mounting accuracy (under optimum conditions)	±0.015mm Cpk≧1.0 ^{Note 2}		±0.035mm Cpk≧1.0
Number of component types	Feeder carriage exchange : Max. 128 types = 32 feeders x 4 (conversion for 8mm tape feeder) Fixed plate : Max. 128 types (conversion for 8mm tape feeder), Trays : 60 types (maximum when equipped with eATS30 x 2)
PCB dimensions	Single use : L50 x W50mm to L810 x W610mm Dual use : L50 x W50mm to L810 x W330mm
Power supply	3-Phase AC 200/208/220/240/380/400/416V +/-10% 50/60Hz
Air supply source	0.45MPa or more, in clean, dry state
External dimension (excluding projections)	L1,374 x W2,102 x H1,445mm
Weight	Approx. 2,550kg (Main unit only)

SMT placement machine ASM Siemens placement machine TX2i/TX2/TX1

Introduction to ASM Siemens Mounter TX2i: ASM Siemens Mounter TX2i: Provide high performance and high precision in a very small footprint. The ASM Siemens Mounter TX2i mounter module sets a new benchmark for mass production. No other placement solution can achieve 25 µm @ 3 sigma accuracy at speeds up to 96,000 cph in such a small footprint (only 1m x 2.3m).