ASM Siemens high-speed placement machine D4 technical data:

Performance Theoretical value up to 81,500CPH

IPC value up to 57,000CPH

Accuracy ±50m, ±0.53?@3δ

Siemens D4 placement machine:

PCB size Single rail transmission 50 x 50 to 610 x 508mm

Dual rail transmission 50 x 50 to 610 x 380mm

PCB thickness standard 0.3 to 4.5mm (others can be provided on request)

Feeding quantity 144 8mm rails

Component range 01005″ – 18.7 x 18.7mm

Quality pickup rate: >/= 99.95%

DPM Rate: Settings

Power supply 200/ 208/ 230/ 380/ 400/ 415VAC ±5%, 50/60Hz

Air supply 5.5bar (0.55MPa) – 10bar (1.0MPa)

Dimensions (length x height x width) 2380 x 2491 x 1953mm

Mass 3419kg (basic machine with 4 feeders)

Technical data of ASM Siemens placement machine D3:

Performance Theoretical value up to 61,000CPH

IPC value up to 37,600CPH

Accuracy ±22μm, ±0.05@3

PCB size Single rail transmission 50 x 50 to 610 x 508mm

Dual rail transmission 50 x 50 to 610 x 430mm

PCB thickness standard 0.3 to 4.5mm (others can be provided on request)

Feeding quantity: 180 pieces of 8mm rails

Component range 0201″ – 200 x 125mm

Quality pickup rate: >/= 99.95%

DPM Rate: Setting Power Supply 200/ 208/ 230/ 380/ 400/ 415VAC ±5%, 50/60Hz

Air supply 5.5bar (0.55MPa) – 10bar (1.0MPa)

Dimensions 2380 x 2815 x 2112mm (LxHxW)

Mass 3790kg (basic machine with 4 feeders)

Technical data of ASM Siemens placement machine D2:

Performance Theoretical value up to 40,500CPH

IPC value up to 27,200CPH

Accuracy ±50μm, ±0.225?@3δ

PCB size Single rail transmission 50 x 50 to 610 x 508mm

Dual rail transmission 50 x 50 to 610 x 430mm

PCB thickness standard 0.3 to 4.5mm (others can be provided on request)

Feeding 90 pieces of 8mm material rail

Component range 01005″ – 200 x 125mm

Quality pickup rate: >/= 99.95%

DPM Rate: Settings

Power supply 200/ 208/ 230/ 380/ 400/ 415VAC ±5%, 50/60Hz

Air supply 5.5bar (0.55MPa) – 10bar (1.0MPa)

Dimensions (length x height x width) 1587 x 2565 x 1980mm

Mass 2343kg (basic machine with 2 feeders)

Siemens placement machine ASM D1 parameters:

Performance Theoretical value up to 20,000CPH

IPC value up to 13,000CPH

Accuracy ±30μm, ±0.05?@3δ

PCB size Single rail transmission 50 x 50 to 610 x 508mm

Dual rail transmission 50 x 50 to 610 x 430mm

PCB thickness standard 0.3 to 4.5mm (others can be provided on request)

Feeding quantity: 90 pieces of 8mm rails

Component range 01005″ – 200 x 125mm

Quality Pickup Rate: >/= 99.95%

DPM Rate: Setting Power Supply 200/ 208/ 230/ 380/ 400/ 415VAC ±5%, 50/60Hz

Air supply 5.5bar (0.55MPa) – 10bar (1.0MPa)

Siemens pick and place machine D1: Size: 1587 x 2636 x 1980mm (length x height x width)

Siemens placement machine D1: mass 2325kg (basic machine with 2 feeders)

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Click to enlarge

Back to products

SMT placement machine SIPLACE ASM Siemens D4/D3/D2/D1 high-speed placement machine

Enquiry

Categories: ASM SIEMENS, SMT placement machine

Description
Shipping & Delivery

Description

Shipping & Delivery

Reviews

There are no reviews yet.

Be the first to review “SMT placement machine SIPLACE ASM Siemens D4/D3/D2/D1 high-speed placement machine”

Related products

Yamaha Wide-Range Compact Modular YC8 Mounter placement machine

SMT placement machine, Yamaha

Specifications

		YC8
Applicable PCB		L50 x W50mm to L330 x W360mm ^*1
Mounting accuracy	When using Yamaha's standard components	Absolute accuracy (μ+3σ):+/-0.05mm /QFP Repeatability(3σ) +/-0.03mm /QFP
Mounting capability	Indication	2.5sec/component (Cycle time from a pickup to mounting with recognition)
Applicable components		4 x 4mm to 100 x 100mm ^*2 (Some components larger than 45 x 45mm ane conditional) Maximum components heights 45mm Maximum payload 1kg
Component supply configuration: Number of component types		Tape reel : MAX. 28 types (8mm width) Tray : MAX. 15 trays Stick
Power supply		3-Phase AC 200/208/220/240/380/400/416V　+/-10%　50/60Hz
Air supply source		0.45MPa or more, in clean, dry states
External dimension (excluding projections)		L 880 x W1,440 x H1,445mm (Main unit only) L 880 x W1,755 x H1,500mm (When ATS15 is installed)
Weight		Approx. 1,000kg (Main unit only) ATS15 : Approx. 120kg

*1: Please consult us separately for maximum board sizes.

*2: Consult us separately regarding component sizes outside the specifications.

Specifications and appearance are subject to change without prior notice.

Yamaha 3D Hybrid Modular S10/S20 Mounter placement machine

	S10	S20
Board size(with buffer unused)	Min. L50 x W30mm to Max. L1,330 x W510mm (Standard L955)	Min. L50 x W30mm to Max. L1,830 x W510mm (Standard L1,455)
Board size(with input or output buffer used)	Min. L50 x W30mm to Max. L420 x W510mm	-
Board size(with input and output buffers used)	Min. L50 x W30mm to Max. L330 x W510mm	Min. L50 x W30mm to Max. L540 x W510mm
Board thickness	0.4 - 4.8mm	0.4 - 4.8mm
Board flow direction	Left to right (Std)	Left to right (Std)
Board transfer speed	Max 900mm/sec	Max 900mm/sec
Placement speed (12 heads + 2 theta) Opt. Cond.	0.08sec/CHIP (45,000CPH)	0.08sec/CHIP (45,000CPH)
Placement accuracy A (μ+3σ)	CHIP +/-0.040mm	CHIP +/-0.040mm
Placement accuracy B (μ+3σ)	IC +/-0.025mm	IC +/-0.025mm
Placement angle	+/-180 degrees	+/-180 degrees
Z axis control / Theta axis control	AC servo motor	AC servo motor
Component height	Max 30mm^*1 (Pre-placed components: max 25mm)	Max 30mm^*1 (Pre-placed components: max 25mm)
Applicable components	0201mm – 120x90mm, BGA, CSP, connector, etc. (Standard 01005 -)	0201mm – 120x90mm, BGA, CSP, connector, etc. (Standard 01005 -)
Component package	8 - 56mm tape (F1/F2 Feeders), 8 - 88mm tape (F3 Electric Feeders), stick, tray	8 - 56mm tape (F1/F2 Feeders), 8 - 88mm tape (F3 Electric Feeders), stick, tray
Drawback check	Vacuum check and vision check	Vacuum check and vision check
Screen language	English, Chinese, Korean, Japanese	English, Chinese, Korean, Japanese
Board positioning	Board grip unit, front reference, auto conveyor width adjustment	Board grip unit, front reference, auto conveyor width adjustment
Component types	Max 90 types (8mm tape), 45 lanes x 2	Max 180 types (8mm tape), 45 lanes x 4
Transfer height	900 +/- 20mm	900 +/- 20mm
Machine dimensions, weight	L1250xD1750xH1420mm, Approx. 1,200kg	L1750xD1750xH1420mm, Approx. 1,500kg

*1 :: Board thickness + Component height = Max 30mm

Panasonic CM202 placement machine Mounter

SMT placement machine, Panasonic

Main parameters of CM202 placement machine: 2004 equipment PCB size: 460mm×360mm Component range that can be attached: 0201 to 24mmQFPS Material station: 104 Theoretical placement speed: 0.088s/chip 40909 pieces/hour Mounting accuracy: ±0.05mm Dimensions and Weight: 2,350(L) X 1,950(D) X 1,430(H)mm&2,800kg Power supply and air source: 3P/200V±10V/3KVa

Samsuang Hanwha DECAN F2

SMT placement machine, Samsung Hanwha

Alignment: Fly Camera, Fix Camera

Spindle & Speed: 2 Gantry * 10 Spindles / 80,000 CPH

Accuracy: ±40µm Cpk≥1.0 (0402 (01005 inch) chip) /±30µm Cpk≥1.0 (IC, Stage Vision)

Component Range: Fly: 0402 ~ □16 mm / Fix: ~□42 mm (Standard) / ~□55 mm (MFOV) / ~ L75 mm Connector (MFOV)

Dimension: L 1,430 x D 1,740 x H 1,995

Hanwha High Speed General Mounter DECAN L2

Spindle & Speed: 2 Gantry * 6 Spindle / 56,000 CPH

Component Range: Fly: 0402 ~ □21 mm / Fix: ~□42 mm (Standard) / ~□55 mm (MFOV) / ~ L75 mm Connector (MFOV)

SMT ASM Siemens Mounter HS60/SIPLACE High Speed Mounter

SMT placement machine, ASM SIEMENS

Number of gantry: 4 Theoretical placement rate: 60000cph Component range: 0.6mmx0.3mm (0201) to 18.7mmx18.7mm Mounting accuracy (4sigma): 80/75um The size of the PCB that can be attached: Single track: 50mmx50mm to 368mmx460mm

Yamaha Compact High-speed Modular YSM10 Mounter placement machine

YSM10
Applicable PCB	L 510 x W 460mm - L 50 x W 50mm Note : Available in lengths up to L950mm as an option.
Applicable components	03015mm to W55 x L100mm (For parts sizes larger the width 45mm, recognition of parts is divided into sections.), Height 15mm or less Note : A multi camera (option) is required for part heights exceeding 6.5mm or part sizes exceeding 12mm
Mounting capability	HM head (10 nozzle) specification : 46,000CPH (under optimum conditions as defined by Yamaha Motor) HM 5 head (5 nozzle) specification : 31,000CPH (under optimum conditions as defined by Yamaha Motor)
Mounting accuracy (Under optimum conditions as defined by Yamaha Motor when standard evaluation materials are used)	+/-0.035mm (+/-0.025mm) Cpk 1.0 (3σ)
Number of component types	Fixed plate : Max. 96 types (conversion for 8mm tape feeder) ^{Note 1} Tray : 15 types (maximum when equipped with sATS15, JEDEC)
Power supply	3-Phase AC 200/208/220/240/380/400/416V +/-10% 50/60Hz
Air supply source	0.45MPa or more, in clean, dry state
External dimension	L1,254 x W1,440 x H1,445mm
Weight	Approx. 1,270kg

SMT Samsung Mounter SM482 Plus 482

Alignment: Fly Camera + Fix Camera (Option)

Spindle & Speed: 1 Gantry * 6 Spindle / 30,000 CPH

Accuracy: ±40μm@±3σ (Chip) / ±30μm@±3σ(QFP)

Component Range: Fly: 0603 ~ □22mm(0402 ~ □14mm) / Fix: ~□55mm, L75mm Connector

Dimension: L 1,650 x D 1,680 x H 2,090