Fuji placement machine NXT second generation M3/M6 parameters:

M3 II/M6 II: 48mm x 48mm~510mm x 534mm (double transport rail)
48mm x 48mm~610mm x 534mm (single transport track)
M6 IISP: 48mm x 48mm~510mm x 520mm (double transport rail)
48mm x 48mm~610mm x 520mm (single transport track)

Fuji placement machine NXT second generation M3/M6 component types:
M3 II: MAX 20 types (8mm tape conversion)
M6 II/M6 IISP: MAX 45 types (8mm tape conversion)

Mounting accuracy of Fuji placement machine NXT second generation M3/M6:
H12S/H08/H04/OF: ±0.05mm(3 sigma) cpk≥1.00
H01/H02/G04: ±0.03mm(3 sigma) cpk≥1.00
GL: ±0.10mm(3 sigma) cpk≥1.00

FUJI Mounter NXTM3/M6 second generation production capacity:
M3 II/M6 II: (H12HS:22,500 cph; H08:10,500 cph; H04:6,500 cph; H01:4,200 cph; G04:6,800 cph; OF:M3 II not available/M6 II 3000 cph; GL:16,363 dph(0.22 sec/dot))
M6 II SP: (H12S:18,500 cph; H08:10,000 cph; H04:6,000 cph; H01:3,500 cph; G04:5,100 cph; OF:2,800 cph; GL:16,363 dph(0.22 sec/dot))

FUJI Fuji placement machine NXTM3/M6 second generation target components:
H12S: 0402~7.5mm x 7.5mm Height: MAX 3.0mm
H08:0402~12mm x 12mm Height:MAX 6.5mm
H04: 1608~38mm x 38mm Height: MAX13mm
H01/H02/OF:1608~74mm x 74mm(32mm X 180mm) Height: MAX 25.4mm
G04: 0402~15.0mm x 15.0mm Height: MAX 6.5mm

FUJI Mounter NXTM3/M6 second-generation component supply:
Intelligent feeder: corresponding to 8, 12, 16, 24, 32, 44, 56, 72, 88mm width strips
Tube feeder: 4≤component width≤15mm (6≤tube width≤18mm), 15≤component width≤32mm (18≤tube width≤36mm)
Tray unit: 135.9X322.6mm (JEDEC specification) (Tray unit M), 276X330mm, 138X330mm (Tray unit LT)
Machine size:
2MII Base: 740(L) x 1934(W)
4M II Base: 1390(L) x 1934(W)
H: 1474 mm (M3 II) 1476 mm (M6 II/M6 IISP)

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Click to enlarge

Back to products

Fuji placement machine NXT II second generation M3/M6 PICK AND PLACE MACHINE MOUNTER

Enquiry

Categories: FUJI, SMT placement machine

Description
Shipping & Delivery

Description

Shipping & Delivery

Reviews

There are no reviews yet.

Be the first to review “Fuji placement machine NXT II second generation M3/M6 PICK AND PLACE MACHINE MOUNTER”

Related products

SMT Samsung Mounter SM482 Plus 482

SMT placement machine, Samsung Hanwha

Specifications

Alignment: Fly Camera + Fix Camera (Option)

Spindle & Speed: 1 Gantry * 6 Spindle / 30,000 CPH

Accuracy: ±40μm@±3σ (Chip) / ±30μm@±3σ(QFP)

Component Range: Fly: 0603 ~ □22mm(0402 ~ □14mm) / Fix: ~□55mm, L75mm Connector

Dimension: L 1,650 x D 1,680 x H 2,090

SMT Samsung Mounter SM481Plus 481

Spindle & Speed: 1 Gantry * 10 Spindle / 40,000 CPH

Component Range: Fly: 0402 ~ □16mm / Fix: ~□55mm, L75mm Connector

σ/QFP

Yamaha Premium High-efficiency Modular YRM20 Mounter placement machine

SMT placement machine, Yamaha

Model	YRM20
Model	Super high-speed rotary RM head	High-speed general-purpose in-line HM head	Odd-shaped components in-line FM (flexible-multi) head
Nozzles (per 1 head unit)	18	10	5
Applicable components	0201mm to W12 x L12mm, Height 6.5mm or less	0201mm to W55 x L100mm, Height 15mm or less	03015mm to W55 x L100mm, Height 30mm or less
Mounting capability under optimum conditions (in high production mode)	2-beam : 115,000CPH (under optimum conditions) 1-beam : 57,500CPH (under optimum conditions)	2-beam : 98,000CPH (under optimum conditions) 1-beam : 49,000CPH (under optimum conditions)	2-beam : 35,000CPH (under optimum conditions) 1-beam : 17,500CPH (under optimum conditions)
Mounting accuracy (high-accuracy mode)	±0.025mm Cpk≧1.0 (under optimum conditions)		±0.035mm Cpk≧1.0 (under optimum conditions)
Number of component types	Feeder carriage exchange : Max. 128 types = 32 feeders x 4 (conversion for 8mm tape feeder) Fixed plate : Max. 128 types (conversion for 8mm tape feeder), Trays : 60 types (maximum when equipped with eATS30 x 2)
PCB dimensions	1-beam : (Single lane) Standard specifications : L50 x W50mm to L510 x W510mm, option : L50 x W50mm to L810 x W510mm 2-beam : (Dual stage) 1-PCB conveyance : L50 x W50mm to L810 x W510mm, 2-PCB conveyance : L50 x W50mm to L380 x W510mm
Power supply	3-Phase AC 200/208/220/240/380/400/416V +/-10% 50/60Hz
Air supply source	0.45MPa or more, in clean, dry state
External dimension (excluding projections)	L1,374 x W1,948 x H1,445mm
Weight	2-beam : Approx. 2,250kg (Main unit only), 1-beam : Approx. 2,150kg (Main unit only)

Panasonic Mounter CM602-L high-speed placement machine

SMT placement machine, Panasonic

Control mode: microcomputer mode External memory: Manage data at PT∗4. Each set of data requires about 1MB. (1 type is required for each 1 type 3.5 2HD floppy disk) Program data: Points Max. 10000 points CM602 power supply Power supply for normal use: 3-phase AC 200 V/ 220 V ±10 V, 3-phase AC 380 V/ 400 V/ 420 V/ 480 V ±20 V Frequency: 50/60 Hz Power supply for HUB ∗ 3: Single-phase AC 100 V ~ AC 240 V Frequency: 50/60 Hz Rated capacity: main machine 4.0 kVA / HUB power supply ∗ 3: 140 VA Supply air pressure: 0.49 MPa ~ 0.78 MPa (operating air pressure is 0.49 MPa ~ 0.54 MPa) Supply air volume: 170 L/min (A.N.R.) Dimensions: 2350 mm (W) × 2690 mm (D) × 1430 mm (H) (excluding 3-section signal tower and color touch panel) quality: Mass of the main engine: 3400 kg (140 kg for the standard configuration without the overall exchange trolley) Overall exchange trolley mass: 140 kg (per 1) Direct tray feeder mass: 195 kg (per 1 unit) Standard composition mass: 3960 kg (1 main engine, 4 overall exchange trolleys) Environmental conditions: Temperature: 10°C ~ 35°C Humidity: 25% RH ~ 75% RH (but water vapor does not condense) Transport and storage conditions: Temperature: −20°C ~ 60°C Humidity: Below 75 % RH (but water vapor does not condense) Altitude: from 0 m above sea level to below 1000 m Noise: < 70dB (A)

Panasonic CM202 placement machine Mounter

Main parameters of CM202 placement machine: 2004 equipment PCB size: 460mm×360mm Component range that can be attached: 0201 to 24mmQFPS Material station: 104 Theoretical placement speed: 0.088s/chip 40909 pieces/hour Mounting accuracy: ±0.05mm Dimensions and Weight: 2,350(L) X 1,950(D) X 1,430(H)mm&2,800kg Power supply and air source: 3P/200V±10V/3KVa

Panasonic NPM-W2 Multifunctional Mounter placement machine

Product Features of Panasonic NPM-W2 Multi-Function Mounter 1. Install & inspect a complete system to achieve efficient and high-quality production To match the actual installation requirements, you can choose high-yield or high-precision mode 2. Can correspond to larger substrates and large components Correspondingly, on a large substrate of 750×550 mm, the component range is also expanded to L150×W25×T30mm 3. Double-track installation (select specifications) to achieve high productivity per unit area According to the production substrate, you can choose independent mounting, alternate mounting, mixed mounting and other mounting methods

Panasonic Mounter CM402-L Modular Super High Speed placement machine

Model name: CM402-L Substrate size: L50mm×W50mm～L510mm×W460mm Substrate replacement time: 0.9s (when the substrate length is below 240mm and under the best conditions) Power supply*1: three-phase AC200V, 3.5kVA Air pressure source*2: 0.49MPa, 150L/min (A.N.R.) Equipment size: W2350mm×D2690mm×H1430mm*3 Weight*4: 3000kg High-speed placement head Mounting fastest speed: 0.06s/chip (Type A) Mounting accuracy: ±50μm/chip (Cpk≧1) Component size: 0603 chip~L24mm×W24mm Multifunctional placement head Mounting fastest speed: 0.21s/QFP (Type B) Mounting accuracy: ±35μm/QFP (Cpk≧1) Component size: 0603 chip~L100mm×W90mm

SMT placement machine Panasonic/Panasonic BM231 placement machine

Panasonic's BM231 modular high-speed multi-function placement machine has any volume, any mix capability by placing various components from 0402 (01005) microchips to BGAs, CSPs and connectors. Maximum productivity is achieved through uninterrupted operation and quick changeovers.