ETOP ELM280X placement machine high speed Pick&Place machine

【Product Description】

A new generation of general-purpose placement machine

ELM280X is a high-speed general-purpose integrated surface mount equipment developed for applications in electronics, lighting, drives and other fields. Circuit boards, substrates. Equipped with self-developed Chinese operating software to ensure the system is stable and reliable. The placement machine is designed for the mixed placement application of LED, SMD, IC, lens and other products. The mobile platform is designed as a 400mm fixed width product with wider application. ETOP Technology has established an extensive support and service network in China to provide complete surface mount solutions for customers’ development, manufacturing and product innovation.

【Features】

l High speed: increase actual production capacity

l High precision: improve placement quality

l Multifunctional: adapt to more components

Enquiry

各项规格		ELM280X技术参数
PCB	PCB Size	Max	(L)1500 x (W)400mm
		Min	(L)30 x (W)30mm
	PCB positioning method		Right/lower side substrate fixed block, left/upper movable fixed slider
	PCB transport direction		Right –> Left (near edge standard)
	PCB replacement time-consuming		5 seconds (best condition)
Placing	Placing speed	theoretical conditions	45,000 CPH
		average condition	30,000~36,000 CPH
	Placing accuracy	CHIP-LED	±0.05mm
	Mounting type	LED CHIP	Cree, Philips, Osram, Lumen and other high-power LED lamp beads; 0603, 3014, 2835, 5050, SMD, IC 30×30, etc.
	identification device		Flight photo image recognition technology
	Type of head		6 nozzle
	Feeder Specifications		8mm、12mm、16mm、24mm
	Feeder Quantity		22 x 8mm
Operation Sysstem	degree of automation		Fully automatic control
	main operating system		Chinese and English operation interface
	Control System		industrial computer
	Drive System		MINAS A6 servo motor
	Detection Systems		Image detection system
	visual system		flight vision system
working environment	Working power		Single phase AC200 ~ 415 V
	rated power		1200W
	Air pressure		80 psi(0.5 Mpa)
	dimension		(L)2000 x (W1370 x (H)1475 mm
	weight		around1000 KG

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Click to enlarge

Back to products

Categories: MADE IN CHINA MACHINE, SMT placement machine

Description
Shipping & Delivery

Description

各项规格		ELM280X技术参数
PCB	PCB Size	Max	(L)1500 x (W)400mm
		Min	(L)30 x (W)30mm
	PCB positioning method		Right/lower side substrate fixed block, left/upper movable fixed slider
	PCB transport direction		Right –> Left (near edge standard)
	PCB replacement time-consuming		5 seconds (best condition)
Placing	Placing speed	theoretical conditions	45,000 CPH
		average condition	30,000~36,000 CPH
	Placing accuracy	CHIP-LED	±0.05mm
	Mounting type	LED CHIP	Cree, Philips, Osram, Lumen and other high-power LED lamp beads; 0603, 3014, 2835, 5050, SMD, IC 30×30, etc.
	identification device		Flight photo image recognition technology
	Type of head		6 nozzle
	Feeder Specifications		8mm、12mm、16mm、24mm
	Feeder Quantity		22 x 8mm
Operation Sysstem	degree of automation		Fully automatic control
	main operating system		Chinese and English operation interface
	Control System		industrial computer
	Drive System		MINAS A6 servo motor
	Detection Systems		Image detection system
	visual system		flight vision system
working environment	Working power		Single phase AC200 ~ 415 V
	rated power		1200W
	Air pressure		80 psi(0.5 Mpa)
	dimension		(L)2000 x (W1370 x (H)1475 mm
	weight		around1000 KG

Shipping & Delivery

Reviews

There are no reviews yet.

Be the first to review “ETOP ELM280X placement machine high speed Pick&Place machine”

Related products

Panasonic CM202 placement machine Mounter

SMT placement machine, Panasonic

Main parameters of CM202 placement machine: 2004 equipment PCB size: 460mm×360mm Component range that can be attached: 0201 to 24mmQFPS Material station: 104 Theoretical placement speed: 0.088s/chip 40909 pieces/hour Mounting accuracy: ±0.05mm Dimensions and Weight: 2,350(L) X 1,950(D) X 1,430(H)mm&2,800kg Power supply and air source: 3P/200V±10V/3KVa

SMT Samsung Mounter SM481Plus 481

SMT placement machine, Samsung Hanwha

Specifications

Alignment: Fly Camera + Fix Camera (Option)

Spindle & Speed: 1 Gantry * 10 Spindle / 40,000 CPH

Accuracy: ±40μm@±3σ (Chip) / ±30μm@±3σ(QFP)

Component Range: Fly: 0402 ~ □16mm / Fix: ~□55mm, L75mm Connector

Dimension: L 1,650 x D 1,680 x H 2,090

σ/QFP

Panasonic Mounter CM602-L high-speed placement machine

Control mode: microcomputer mode External memory: Manage data at PT∗4. Each set of data requires about 1MB. (1 type is required for each 1 type 3.5 2HD floppy disk) Program data: Points Max. 10000 points CM602 power supply Power supply for normal use: 3-phase AC 200 V/ 220 V ±10 V, 3-phase AC 380 V/ 400 V/ 420 V/ 480 V ±20 V Frequency: 50/60 Hz Power supply for HUB ∗ 3: Single-phase AC 100 V ~ AC 240 V Frequency: 50/60 Hz Rated capacity: main machine 4.0 kVA / HUB power supply ∗ 3: 140 VA Supply air pressure: 0.49 MPa ~ 0.78 MPa (operating air pressure is 0.49 MPa ~ 0.54 MPa) Supply air volume: 170 L/min (A.N.R.) Dimensions: 2350 mm (W) × 2690 mm (D) × 1430 mm (H) (excluding 3-section signal tower and color touch panel) quality: Mass of the main engine: 3400 kg (140 kg for the standard configuration without the overall exchange trolley) Overall exchange trolley mass: 140 kg (per 1) Direct tray feeder mass: 195 kg (per 1 unit) Standard composition mass: 3960 kg (1 main engine, 4 overall exchange trolleys) Environmental conditions: Temperature: 10°C ~ 35°C Humidity: 25% RH ~ 75% RH (but water vapor does not condense) Transport and storage conditions: Temperature: −20°C ~ 60°C Humidity: Below 75 % RH (but water vapor does not condense) Altitude: from 0 m above sea level to below 1000 m Noise: < 70dB (A)

Yamaha High-efficiency Modular Z:LEX YSM20R Mounter placement machine

SMT placement machine, Yamaha

Model	YSM20R
Applicable PCB	Single lane L810 x W490 to L50 x W50 Dual stage Note: For X-axis 2-beam option only 1PCB conveyance: L810 x W490 to L50 x W50 2PCB conveyance: L380 x W490 to L50 x W50
Head / Applicable components	High-Speed Multi (HM) Head ^* 0201mm to W55 x L100mm, Height 15mm or less Odd-shaped components (FM: Flexible Multi) head: 03015mm to W55 x L100mm, Height 28mm or less
Mounting capability (under optimum conditions as defined by Yamaha Motor)	X axis 2-beam: High-speed multi-purpose (HM: High-speed Multi) head x 2 95,000CPH
Mounting accuracy	±0.035mm (±0.025mm) Cpk≧1.0 (3σ) (under optimum conditions as defined by Yamaha Motor when standard evaluation materials are used)
Number of component Types	Fixed plate: Max. 140 types (conversion for 8mm tape feeder) Feeder carriage exchange: Max. 128 types (conversion for 8mm tape feeder) Trays for 30 types (Fixed type: max., when fitted with sATS30) and 10 types (Carriage type: max., when fitted with cATS10)
Power supply	3-Phase AC 200/208/220/240/380/400/416V +/-10% 50/60Hz
Air supply source	0.45MPa or more, in clean, dry state
External dimension (excluding projections)	L 1,374 x W 1,857 x H1,445mm (Main unit only)
Weight	Approx. 2,050kg (Main unit only)

SMT ASM Siemens Mounter HS60/SIPLACE High Speed Mounter

SMT placement machine, ASM SIEMENS

Number of gantry: 4 Theoretical placement rate: 60000cph Component range: 0.6mmx0.3mm (0201) to 18.7mmx18.7mm Mounting accuracy (4sigma): 80/75um The size of the PCB that can be attached: Single track: 50mmx50mm to 368mmx460mm

Yamaha Premium Modular Σ-G5SⅡ Mounter placement machine

	∑-G5SⅡ
Applicable PCB	Single lane	L610×W510 mm to L50×W50 mm (Optional: L1,200×W510 to L50×W50 mm)
Applicable PCB	Dual lane	L610×W250 mm to L50×W84mm (dual feed) L610×W415mm (single feed)
Mounting capability	High-Speed Multi-Head×2 specifications: 90,000 CPH (single lane/dual lane)
Mounting accuracy (Under optimum conditions as defined by Yamaha Motor when standard evaluation materials are used)	High-Speed Multi (HM) Head	0201mm/03015mm: ±25μm/80,000 CPH 0402mm: ±36 μm/85,000 CPH 0603mm: ±40 μm/90,000 CPH
	Flexible Multi (FM) Head	±15μm
Applicable components	High-Speed Multi (HM) Head	0201mm to L44×W44×H12.7 mm or under
Applicable components	Flexible Multi (FM) Head	1005mm to L72×W72×H25.4 mm or under Connector: 150×26 mm
Number of component types	120 types max. (8 mm wide tape equivalent)
Power supply	3-phase AC200V ±10%, 50/60Hz
Air supply source	0.45 to 0.69 MPa (4.6 to 7 kgf/cm²)
External dimension (excluding projections)	L 1,280 x W 2,240 x H 1,450mm
Weight	Approx. 1,800 kg

Specifications and appearance are subject to change without prior notice.

Panasonic Mounter NPM-TT2 multifunctional production system placement machine

The Panasonic Mounter NPM-TT2 is a line configuration capable of achieving both high productivity per unit area and versatility *When directly connecting the NPM-W2, an M-size double-track conveyor belt (optional) is required. The placement head (8-nozzle placement head, 3-nozzle placement head - you can choose the general-purpose 8-nozzle placement head or the 3-nozzle placement head with special-shaped component capability) The specification of the supply part can be selected .change. By reorganizing the tray feeder/exchange trolley, the line configuration can be adapted to the component supply form. Using a multi-functional recognition camera, the recognition and inspection of the height direction of the components can be realized at a high speed, and it can carry out stable and high-speed mounting of special-shaped components) Alternate mounting and independent mounting correspondence ——(can choose the best mounting method corresponding to the production substrate)

SMT placement machine SIPLACE ASM Siemens D4/D3/D2/D1 high-speed placement machine

ASM Siemens high-speed placement machine D4 technical data: Performance Theoretical value up to 81,500CPH IPC value up to 57,000CPH Accuracy