ASM Siemens Mounter HS50
1. Available parts size: from 0201 (0.25mm x 0.5mm) to 18.7mm x 18.7mm.
2. Types of parts that can be attached: Resistor, Capacitor, BGA, u BGA, QFP, CSP, PLCC, Connector and other special-shaped parts.
3. The types of parts that can be loaded at one time: 144 kinds (8mm parts).
4. SMT speed: 50,000 parts/hour.
5. Chip accuracy: ±0.075 (at 4 sigma).
6. Material station: 144
7. The size of the PCB that can be attached:
In single track: PCB from 50mm x 50mm to 368mm x 460mm;
In double track: PCB from 50mm x 50mm to 368mm x 216mm.
7. PCB thickness that can be pasted: 0.5mm to 4.5mm.
8. PCB weight: 3 kg.
9. Power consumption: 4 KW (at full load).
10. Air consumption: 950 liters/min (at pressure from 6.5 ba to 10 ba).
11. Weight: 3.5 tons.
12. Dimensions: 2.4m * 2.9m * 1.8m (length *width * height)
Specifications
| ∑-G5SⅡ | ||
|---|---|---|
| Applicable PCB | Single lane | L610×W510 mm to L50×W50 mm (Optional: L1,200×W510 to L50×W50 mm) |
| Dual lane | L610×W250 mm to L50×W84mm (dual feed) L610×W415mm (single feed) | |
| Mounting capability | High-Speed Multi-Head×2 specifications: 90,000 CPH (single lane/dual lane) | |
| Mounting accuracy (Under optimum conditions as defined by Yamaha Motor when standard evaluation materials are used) | High-Speed Multi (HM) Head | 0201mm/03015mm: ±25μm/80,000 CPH 0402mm: ±36 μm/85,000 CPH 0603mm: ±40 μm/90,000 CPH |
| Flexible Multi (FM) Head | ±15μm | |
| Applicable components | High-Speed Multi (HM) Head | 0201mm to L44×W44×H12.7 mm or under |
| Flexible Multi (FM) Head | 1005mm to L72×W72×H25.4 mm or under Connector: 150×26 mm | |
| Number of component types | 120 types max. (8 mm wide tape equivalent) | |
| Power supply | 3-phase AC200V ±10%, 50/60Hz | |
| Air supply source | 0.45 to 0.69 MPa (4.6 to 7 kgf/cm²) | |
| External dimension (excluding projections) | L 1,280 x W 2,240 x H 1,450mm | |
| Weight | Approx. 1,800 kg | |
- Specifications and appearance are subject to change without prior notice.
Reviews
There are no reviews yet.